Economical Car Automobile Paint Thickness Tester

• Sensor: F&N Probe
• Sensor Location: Internal
• Range: 0 to 2000um
• Accuracy: 2%+0.02mm
• Resolution: 10um
• LCD Display: LCD
• Model NO.: EC-100
• Battery: 2PCS 1.5V AAA
• Standards/Certificates: Ce, RoHS, FCC, ISO2178, ISO2360
• Transport Package: Tool Box/Carton
• Specification: 0~2000um, 2%+0.02mm
• Trademark: YOWEXA
• Origin: Shenzhen China
• Production Capacity: 50000PCS/Year

Product Description

This gauge is ultra low cost coating thickness gauge and can mainly be used to measure
paint coating thickness. It is used for non-destructive coating thickness measurement of
non-magnetic coatings, e.g. paint, enamel, chrome on steel, and insulating coatings,
e.g. paint and anodizing coatings on non-ferrous metals.

Features:

·    Ultra low cost
·    Easy to do zero calibration
·    Power off automatically
·    Low battery indication

Specifications:

Model	EC-100
Measuring Principle	Eddy Current(F+N)
Measuring Range	0 to 2 mm
Accuracy	± (2%+0.02 mm)
Resolution	0.01mm
Units	mm, mils
Minimum Curvature Radius Convex	1.5 mm
Minimum Curvature Radius Concave	25 mm
Minimum Measuring Area	Diameter 6 mm
Computer Interface	Download data via USB
Power Supply	Two 1.5 V AAA battery
Operation Environment	Temperature:  0 to 50ºC
Storage Environment	Temperature: -10 to 60°C(-4 to 158°F)
Standard Certification	CE, ROHS, ISO 2178, 2360, GB/T 4956-2003, 4957-2003
Dimensions	89mmX49mmX21mm/45g/ABS

1.  OEM Manufacturing

2.  ODM service

3.   Small order/ Prompt delivery 

4.   We will reply to you for your inquiry within 24 hours.

 

 1. Is the measuring error large?
 •  Enter the menu interface, clear the calibration data; shut down to   restore the factory configuration steps; do zero calibration after booting, (Note: you need to do      zero calibration on the customer's own substrate)

2. Does the measurement screen display overflow?
•   The coating thickness exceeds the measurement range.
•   There is an error and zero calibration is required on the substrate. 
•   Probe fault

3. Measurement no response? 
•   Check if the battery has power.
•   The probe has a fault.
•   Whether the measured material meets the measurement principle.                    

4. Does the measurement show a negative number?
•   It is judged according to the customer's materials whether the machine accuracy is applicable.
•   The calibration did not do well and needs to be recalibrated.

 5. During the measurement process, is it sometimes display F, sometimes display N?
 •  The automatic mode undistinguishable the type of material and it requires manual switching of the measurement principle.

 6. How to do calibration?
 •   Please refer to the zero calibration, point calibration step.

 7. Long press "ZERO" does not respond?
 •  You need to restore the factory settings and then operate.

 8. It can measurement but there is no reading, why?
 •   Confirm whether the mode is in continuous measurement mode 
 •   Check if the beep is broken