Coating Thickness Gauge Thickness measuring tool for Car Paint
EC-500A/EC-500
These gauges can be used for non-destructive coating thickness measurement of non-magnetic coatings, e.g. paint, enamel, chrome on steel, and insulating coatings, e.g. paint and anodizing coatings on non-ferrous metals.
· High accuracy and stability
· LCD shows number, mean, maximum, minimum
· Easy to do zero calibration
· Power off automatically
· Low battery indication
· Detect the substrates type automatically
Wide Range Of Application |
· Metalwork · Automobile Works · Used Car Market
· Foil Manufacturer · Industrial Lacquer · Paper Mill
Model |
EC-500 |
EC-500F |
EC-500N |
Probe |
F-Probe & N-Probe |
F-Probe |
N-Probe |
Measuring Principle |
Magnetic induction & Eddy Currents |
Magnetic induction |
Eddy Currents |
Measuring Range |
0 to 1500um |
Accuracy |
± (2%+1um) |
Resolution |
0~99.9(0.1um) 100um~999um(1um) 1000um~1500um(0.01mm)
0mils~3.933mils (0.004mils), 3.934mils~39.39mils (0.01mils), 39.4mil~51.2mil (0.1mil) |
Calibration |
One point to four point calibration, zero point calibration |
Data Group |
One direct group(readings not be stored to memory)
Four general groups (readings will be stored automatically)
NOTE: each group have individual statistics, alarm limit settings and calibration |
Statistics |
No. of readings, mean, minimum, maximum and standard deviation |
Units |
um, mm, mil |
Alarm |
User can set the high/low alarm limit; Alarm icon displayed on LCD when over the limit |
Minimum Curvature Radius Convex |
1.5mm |
Minimum Curvature Radius Concave |
25mm |
Minimum Measuring Area |
Diameter 6mm |
Minimum Thickness Of Substrate |
F-probe: 0.5mm(0.02");N-probe: 0.3mm(0.012") |
0.5mm(0.02") |
0.3mm(0.012") |
Maximum Measuring Rate |
Two readings per second |
Computer Interface |
Download data via USB |
Power Supply |
Two 1.5V AAA battery |
Operation Environment |
Temperature: 0 to 40°C(32 to 104°F); Humidity: 20% to90%RH |
Storage Environment |
Temperature: -20 to 70°C(-4 to 158°F) |
Standard Certification |
ROHS ;WEEE;CE |
Dimensions |
110mm*53mm*24mm(4.33"*2.09"*0.94") |
Case Material And Weight |
ABS; 92g(3.24 oz) |
1. Is the measuring error large?
• Enter the menu interface, clear the calibration data; shut down to restore the factory configuration steps; do zero calibration after booting, (Note: you need to do zero calibration on the customer's own substrate)
2. Does the measurement screen display overflow?
• The coating thickness exceeds the measurement range.
• There is an error and zero calibration is required on the substrate.
• Probe fault
3. Measurement no response?
• Check if the battery has power.
• The probe has a fault.
• Whether the measured material meets the measurement principle.
4. Does the measurement show a negative number?
• It is judged according to the customer's materials whether the machine accuracy is applicable.
• The calibration did not do well and needs to be recalibrated.
5. During the measurement process, is it sometimes display F, sometimes display N?
• The automatic mode undistinguishable the type of material and it requires manual switching of the measurement principle.
6. How to do calibration?
• Please refer to the zero calibration, point calibration step.
7. Long press "ZERO" does not respond?
• You need to restore the factory settings and then operate.
8. It can measurement but there is no reading, why?
• Confirm whether the mode is in continuous measurement mode
• Check if the beep is broken
- From raw materials to final products, we have a strict quality control system. Our defective rate is about 0.1%.
- Our staff is well-trained and educated in this industry, we will save money in the end because of our efficiency and know-how.
- We have been in business for 10 years and thanks to our R&D department, we always catch the latest trend in the market.
- With the required certificate and experience after-sales service, there was no issue in the shipment we have arranged.
- We have rich experience in handling orders for heavy buyers with the professional process.
• Stable raw material purchasing
• Favorable order follow-up management
• Laudable lead-time & shipment control
• Traceable quality evaluation
• Flexible payment terms
• Remarkable after-sale service
6. Innovative testing technology is always pursued and to do.
• We are first to create the LED display rotated and red backlight alarm in the world.
• We are the first one create menu operations for coating thickness gauges in China.
• Software: Dgraph can be so easily used to set up, download data, view graph and output reports.